# MS Linear > MS Linear is a Suzhou, China based manufacturer of precision linear motion components: ball screws, linear guideways, ball splines, linear shafts, cylindrical guides, linear bearings, transmission blocks, locking guideways, single-axis and multi-axis robots, torque motors, direct-drive stages and semiconductor handling subsystems. The company supplies standard and custom builds to machine tool, semiconductor, medical, packaging, robotics and automotive customers, with export documentation and OEM/ODM support. ## Products (Linear Motion Catalog) - [Ball Screws](https://www.mslinear.com/ball-screw/): Ball screws: rolled and ground screws in SFU, SFI, SFS, SFE and FSY types, with C3-C7 accuracy and custom end machining. - [Ball Splines](https://www.mslinear.com/ball-spline/): Ball splines: combined linear and rotary motion on one shaft, with custom shaft, flange and preload options. - [Linear Guideways](https://www.mslinear.com/linear-guideway/): Linear guideways: profile rail guideways in ball, roller, wide, miniature and stainless series, with C/H/P accuracy and Z0-ZB preload. - [Single-Axis Robots](https://www.mslinear.com/single-axis-robot/): Single-axis robots: ball screw or belt driven linear modules, with stroke, payload and mounting built to drawing. - [Multi-Axis Robots](https://www.mslinear.com/multi-axis-robot/): Multi-axis robots: Cartesian, gantry and multi-axis systems assembled from single-axis modules. - [End Effectors](https://www.mslinear.com/end-effector/): End effectors: grippers, vacuum suction devices and quick-change tooling for robot handling. - [Harmonic Drives](https://www.mslinear.com/harmonic-drives/): Harmonic drives: high-ratio, zero-backlash reducers with high torque density for compact axes. - [Bearings](https://www.mslinear.com/bearing/): Bearings: ball screw support units, crossed roller bearings and precision bearing sets. - [Torque Motor Rotary Tables](https://www.mslinear.com/torque-motor-rotary-table/): Torque motor rotary tables: direct-drive rotary tables for zero-backlash indexing and high rigidity. - [Submersible High-Speed Rotary Tables](https://www.mslinear.com/submersible-high-speed-rotary-table/): Submersible high-speed rotary tables: sealed rotary tables for wet or submerged processing. - [Torque Motors](https://www.mslinear.com/torque-motor/): Torque motors: direct-drive servo motors with high torque at low speed and no gearbox. - [Drives & Controllers](https://www.mslinear.com/drive-controller/): Drives and controllers: servo drives, motion controllers and fieldbus modules for linear motion axes. - [Linear Motor Stages](https://www.mslinear.com/linear-motor-stage/): Linear motor stages: ironless and iron-core direct-drive stages for high-speed, high-accuracy positioning. - [Direct Drive Motors](https://www.mslinear.com/direct-drive-motor/): Direct drive motors: backlash-free DD motors for rotary and linear axes. - [Semiconductor Subsystems](https://www.mslinear.com/semiconductor-subsystem/): Semiconductor subsystems: clean-room wafer handling, transfer and positioning subsystems. - [Wafer Transfer Systems](https://www.mslinear.com/wafer-transfer-system/): Wafer transfer systems: wafer handling modules for load ports, EFEM and vacuum environments. - [Wafer Robots](https://www.mslinear.com/wafer-robot/): Wafer robots: high-cleanliness pick-and-place robots for semiconductor equipment. - [Linear Shafts](https://www.mslinear.com/linear-shaft/): Linear shafts: metric solid, hollow and inch shafts in GCr15, hardened to HRC 60-62, with end machining and hard chrome. - [Cylindrical Guides](https://www.mslinear.com/cylindrical-guide/): Cylindrical guides: SC, SBR/TBR and KBE round-shaft guides for long stroke and cost-sensitive axes. - [Linear Bearings](https://www.mslinear.com/linear-bearing/): Linear bearings: SDM, LM/LME and KH sleeves in closed, open, adjustable and flanged bodies. - [Transmission Blocks](https://www.mslinear.com/transmission-block/): Transmission blocks: HM integrated motor seats plus MGD fixed and MC adjustable nut blocks. - [Locking Guideways](https://www.mslinear.com/locking-guideway/): Locking guideways: TGR-T guideways with a locking element for vertical axes holding position without a brake. ## CAD Downloads - [Single-Axis CAD Downloads](https://www.mslinear.com/single-axis-download/): Single-axis module CAD: KA and KC screw and belt modules, with stroke and motor options. - [KA Semi-Closed Aluminum Screw Modules](https://www.mslinear.com/ka-semi-closed-screw-module/): 2D and 3D CAD drawings for linear motion components. - [KA 100 A type](https://www.mslinear.com/ka-100-a-type/): 2D and 3D CAD drawings for linear motion components. - [KA 136 A type](https://www.mslinear.com/ka-136-a-type/): 2D and 3D CAD drawings for linear motion components. - [KA 170 A type](https://www.mslinear.com/ka-170-a-type/): 2D and 3D CAD drawings for linear motion components. - [KA 200 A type](https://www.mslinear.com/ka-200-a-type/): 2D and 3D CAD drawings for linear motion components. - [KA 100 B type](https://www.mslinear.com/ka-100-b-type/): 2D and 3D CAD drawings for linear motion components. - [KA 136 B type](https://www.mslinear.com/ka-136-b-type/): 2D and 3D CAD drawings for linear motion components. - [KA 170 B type](https://www.mslinear.com/ka-170-b-type/): 2D and 3D CAD drawings for linear motion components. - [KA 220 B type](https://www.mslinear.com/ka-220-b-type/): 2D and 3D CAD drawings for linear motion components. - [KA Semi-Closed Aluminum Belt Modules](https://www.mslinear.com/ka-semi-closed-belt-module/): 2D and 3D CAD drawings for linear motion components. - [KA 100B](https://www.mslinear.com/ka-100b/): 2D and 3D CAD drawings for linear motion components. - [KA 136B](https://www.mslinear.com/ka-136b/): 2D and 3D CAD drawings for linear motion components. - [KA 170B](https://www.mslinear.com/ka-170b/): 2D and 3D CAD drawings for linear motion components. - [KA 220B](https://www.mslinear.com/ka-220b/): 2D and 3D CAD drawings for linear motion components. - [KC Fully-Closed Aluminum Screw Modules](https://www.mslinear.com/kc-fully-closed-screw-module/): 2D and 3D CAD drawings for linear motion components. - [KC 50 B type](https://www.mslinear.com/kc-50-b-type/): 2D and 3D CAD drawings for linear motion components. - [KC 80 B type](https://www.mslinear.com/kc-80-b-type/): 2D and 3D CAD drawings for linear motion components. - [Semiconductor CAD Downloads](https://www.mslinear.com/semiconductor-download/): Semiconductor CAD: wafer loaders and wafer robots for tool integration. - [Wafer Loaders](https://www.mslinear.com/wafer-loader/): 2D and 3D CAD drawings for linear motion components. - [Wafer Robots](https://www.mslinear.com/wafer-robot-download/): 2D and 3D CAD drawings for linear motion components. ## News & Updates ## Resources - [Products](https://www.mslinear.com/product/): Full linear motion catalog: guideways, ball screws, shafts, bearings, modules and custom builds. - [Knowledge Index](https://www.mslinear.com/knowledge-index/): All technical guides on one page with a one-line answer each. - [Guideway Knowledge Hub](https://www.mslinear.com/guideway-knowledge/): Guideway guides grouped by decision: sizing, load and life, installation, special formats, screws, shafts and bearings. - [FAQ](https://www.mslinear.com/faq/): Answers on accuracy grades, preload, rail length, MOQ, lead time, packing and payment terms. - [Inquiry](https://www.mslinear.com/inquiry/): Send a load case, stroke, accuracy target or drawing for a selection review. - [Contact](https://www.mslinear.com/contact/): Contact details for quotes, drawings and technical questions. - [About](https://www.mslinear.com/about/): About MS Linear, the Suzhou manufacturing base and quality process. - [Guideway Selection](https://www.mslinear.com/linear-guideway-selection/): Nine-step selection: duty, series, size, accuracy, preload, lubrication and mounting. - [Guideway Size Calculator](https://www.mslinear.com/linear-guideway-calculator/): Mass, geometry and duty to load per carriage, required C and C0, and the smallest size that carries it. - [Accuracy Grades and Preload](https://www.mslinear.com/linear-guideway-accuracy-preload/): What C, H, P, SP and UP control, how preload changes stiffness and life, and how to specify both. - [Ball vs Roller Guideway](https://www.mslinear.com/ball-vs-roller-linear-guideway/): Where ball and roller contact differ in rigidity, friction, speed and cost. - [Moment Load](https://www.mslinear.com/linear-guideway-moment-load/): Roll, pitch and yaw moments from an offset centre of gravity, overhang formula and four ways to cut the moment. - [Guideway Lubrication](https://www.mslinear.com/linear-guideway-lubrication/): Relubrication interval converted to hours, grease versus oil, fill procedure and dry-raceway signs. - [Friction and Drive Force](https://www.mslinear.com/linear-guideway-friction/): Ball and roller friction coefficients, drive force for horizontal, vertical and inclined axes, and motor margin. - [Mean Load](https://www.mslinear.com/linear-guideway-mean-load/): Stepped, linear and sinusoidal duty converted into one equivalent load for life. - [Installation](https://www.mslinear.com/linear-guideway-installation/): Master rail, datum seating, second-rail alignment, diagonal block mounting and running-force check. - [Rail Joints](https://www.mslinear.com/linear-guideway-butt-joint/): Joint position on a long stroke, staggered rails, assembly order and symptoms of a bad joint. - [Dust Protection](https://www.mslinear.com/linear-guideway-dust-protection/): Wiper codes ZZ, KK and DD, metal scrapers, covered rails and bellows by contaminant. - [Mounting Surface](https://www.mslinear.com/linear-guideway-mounting-surface/): Bed flatness and two-rail parallelism by grade, measurement methods and remedies. - [Series Comparison](https://www.mslinear.com/linear-guideway-series-comparison/): Guideway families mapped by contact type, mounting height, rail width and protection. - [Replacement Cross-Reference](https://www.mslinear.com/linear-guideway-replacement-cross-reference/): Drawing designation to family map, four dimensional checks before a swap, and five cases where a replacement fails. - [How an Order Runs](https://www.mslinear.com/how-an-order-runs/): Drawing review, quotation, production, inspection, packing and delivery, and what the quotation fixes. - [RFQ Checklist](https://www.mslinear.com/guideway-rfq-checklist/): The eight fields that set the price, where the accuracy and preload markings sit, and a copy-ready template. - [Life Correction](https://www.mslinear.com/linear-guideway-life-correction/): Hardness fh, temperature ft and load factor fw with a worked corrected life. - [Mounting Orientation](https://www.mslinear.com/linear-guideway-mounting-orientation/): Horizontal, wall, inverted and vertical axes: load direction, preload and upkeep. - [Guideway Noise](https://www.mslinear.com/linear-guideway-noise/): Recirculation ring, joint click, wiper rub and frame resonance, and the order to fix them. - [Miniature Guideway Selection](https://www.mslinear.com/miniature-linear-guideway-selection/): Sizes 7 to 15: load, stroke, mounting height and protection limits. - [Wide Rail Guideway](https://www.mslinear.com/wide-rail-linear-guideway/): One wide track instead of two rails, and the axes where it fits. - [Stainless Steel Guideway](https://www.mslinear.com/stainless-steel-linear-guideway-knowledge/): Corrosion cases, material options and the cost trade-off. - [Silent Guideway Selection](https://www.mslinear.com/silent-linear-guideway-selection/): Noise sources and what a silent series changes. - [Ball Screw Part Number](https://www.mslinear.com/ball-screw-part-number/): Diameter, lead, circuit, nut count, accuracy and preload decoded segment by segment. - [Linear Module Selection](https://www.mslinear.com/linear-module-selection/): Stroke, load, speed and grade for single-axis modules. - [Ball Screw Support Seats](https://www.mslinear.com/screw-support-seat-selection/): Fixed end versus supported end, bearing pairs, locknuts and housing fit. - [Linear Shaft Selection](https://www.mslinear.com/linear-shaft-selection/): Hardness, diameter, support spacing and end machining for shafts. - [Cylindrical vs Square Guide](https://www.mslinear.com/cylindrical-guide-vs-square-guide/): Stiffness, alignment, cost and application fit for round versus profile rails. - [Linear Bearing Selection](https://www.mslinear.com/linear-bearing-selection/): Clearance, series, housing fit and seals for linear bearing sleeves. - [Combined Transmission Block](https://www.mslinear.com/combined-transmission-block/): Screw, support and motor seat integrated in one body. - [Locking Linear Guideway](https://www.mslinear.com/locking-linear-guideway/): Hold a vertical axis in position without a brake. - [Heavy-Duty Cylindrical Guide](https://www.mslinear.com/heavy-duty-cylindrical-guide/): Twin shafts, roller rails and load capacity for heavy axes. - [Flanged Linear Bearing](https://www.mslinear.com/flanged-linear-bearing/): When a flange replaces a separate housing. - [Guideway Size Chart](https://www.mslinear.com/linear-guideway-size-chart/): Load ratings and dimensions from size 15 to 65. - [TGH vs TGL](https://www.mslinear.com/tgh-vs-tgl-linear-guideway/): Same rating, different mounting height and stroke. - [CA vs HA](https://www.mslinear.com/ca-vs-ha-linear-guideway-block/): Long body versus short body: rating and stroke trade-off. - [DG vs TG](https://www.mslinear.com/dg-vs-tg-linear-guideway/): Low-profile range and what fits above it. - [Industries](https://www.mslinear.com/industries/): Linear motion by application, constraints first and components second. - [Semiconductor and Electronics](https://www.mslinear.com/industries/semiconductor/): Wafer handling, EFEM transfer and metrology stages sized for the tool frame. - [Machine Tools and Metal Cutting](https://www.mslinear.com/industries/machine-tools/): Screw drives, heavy guideways and rotary tables for cutting, grinding and EDM. - [Medical and Laboratory Automation](https://www.mslinear.com/industries/medical-lab/): Clean, quiet and repeatable axes for analyzers, dosing and sample handling. - [Packaging and Material Handling](https://www.mslinear.com/industries/packaging/): Long stroke, high cycle axes for cartoners, palletizers and conveyors. - [Robotics and Automation](https://www.mslinear.com/industries/robotics/): Guideways, modules and rotary axes for robot cells and gantries. - [Automotive and New Energy](https://www.mslinear.com/industries/automotive/): Battery, assembly and inspection axes built for cycle time and uptime. - [SF Solid Linear Shaft](https://www.mslinear.com/linear-shaft/sf-series-solid-linear-shaft/): Metric solid shaft 3-150 mm, HRC 60-62, h6 or g6, up to 6000 mm. - [SP Hollow Linear Shaft](https://www.mslinear.com/linear-shaft/sp-series-hollow-linear-shaft/): 12-60 mm OD with custom bore, bore and OD ground in one set-up. - [SI Inch Linear Shaft](https://www.mslinear.com/linear-shaft/si-series-inch-linear-shaft/): From 1/4 in, g6 or h6, UNC and UNF end threads, imperial fits kept. - [SC Cylindrical Guide](https://www.mslinear.com/cylindrical-guide/sc-series-cylindrical-linear-guide/): 8-50 mm shaft, aluminium carriage in short, standard and long bodies. - [SBR/TBR Twin-Rail Guide](https://www.mslinear.com/cylindrical-guide/sbr-tbr-twin-rail-cylindrical-guide/): Two shafts in one block, 10-50 mm, matched set with end supports. - [KBE Open Cylindrical Guide](https://www.mslinear.com/cylindrical-guide/kbe-open-type-cylindrical-guide/): Open block for a shaft supported along its length, 16-50 mm. - [SDM Linear Bearing](https://www.mslinear.com/linear-bearing/sdm-linear-bearing/): Closed, AJ adjustable and OP open bodies, steel cage, bores from 6 mm. - [LM and LME Linear Bearings](https://www.mslinear.com/linear-bearing/lm-lme-linear-bearing/): Metric and European bodies, closed, adjustable and open, bores from 5 mm. - [KH Miniature Linear Bearing](https://www.mslinear.com/linear-bearing/kh-miniature-linear-bearing/): Short body, sealed ends, bores from 8 mm, for compact heads. - [HM Integrated Motor Seat](https://www.mslinear.com/transmission-block/hm-integrated-motor-seat/): Motor seat, coupling housing, bearing pair and nut block in one body. - [MGD Fixed Nut Block](https://www.mslinear.com/transmission-block/mgd-fixed-nut-block/): Square housing for 16-50 mm screws and DSG nuts, fixed height. - [MC Adjustable Nut Block](https://www.mslinear.com/transmission-block/mc-adjustable-nut-block/): Height trim between nut seat and mounting face, 16 mm screws upward. - [TGR-T Under-Locking Guideway](https://www.mslinear.com/locking-guideway/tgr-t-under-locking-guideway/): Lock below the rail, sizes 15-55, bolts M5 to M14, built to length. ## Optional - [News](https://www.mslinear.com/news/): Company news and product updates. - [Downloads](https://www.mslinear.com/download/): CAD downloads: 2D and 3D drawings for linear modules, guideways and semiconductor handling. - [Stock & Ready to Ship](https://www.mslinear.com/stock/): Standard sizes and ready-to-ship stock list. - [Privacy Policy](https://www.mslinear.com/privacy/): How MS Linear collects, uses and protects personal information.