---
title: "SI Series Inch Linear Shaft: 1/4 in Up, HRC 60–62"
date: 2026-11-18
description: "Product OverviewThe SI series covers inch shafts, ground to the same hardness as the metric range for machines built to imperial drawings. Sizes start at 6.35 m..."
source: https://www.mslinear.com/linear-shaft/si-series-inch-linear-shaft/
---

# SI Series Inch Linear Shaft: 1/4 in Up, HRC 60–62

## Product Overview

The SI series covers inch shafts, ground to the same hardness as the metric range for machines built to imperial drawings. Sizes start at 6.35 mm (1/4 in) and follow the inch ladder, with the outside diameter toleranced in g6 or h6 as the drawing requires.

An inch shaft is not a converted metric shaft: the diameters, the bearing bores and the end threads all follow the inch series, so a mixed inch and metric machine keeps its original fits. Ends can be threaded UNC or UNF, stepped or keyed.

Stock lengths and cut-to-length supply both work; the same 6000 mm limit applies, with butted joints above it. Pair the shaft with an inch-bore linear bearing or a plain bushing, and check the fit against the [linear bearing guide](/linear-bearing-selection/) before ordering.

<table class="ms-spec-table"><tr><th>Parameter</th><th>Specification</th></tr><tr><td>Series</td><td>SI inch linear shaft</td></tr><tr><td>Diameter range</td><td>6.35 mm (1/4 in) upward, inch ladder</td></tr><tr><td>Material</td><td>GCr15 bearing steel (SUJ2)</td></tr><tr><td>Hardness</td><td>HRC 60–62</td></tr><tr><td>Case depth</td><td>0.4–1.0 mm at small sizes, 0.8–2.0 mm above 3/4 in</td></tr><tr><td>Tolerance</td><td>g6 or h6, per drawing</td></tr><tr><td>Maximum length</td><td>6000 mm; longer by butted joint</td></tr><tr><td>Surface</td><td>Ground, hard chrome optional</td></tr><tr><td>End machining</td><td>UNC / UNF thread, step, keyway</td></tr><tr><td>Minimum order</td><td>1 piece</td></tr><tr><td>Lead time</td><td>7–10 days standard; 10–15 days with end machining</td></tr></table>

## Product Features

- Inch diameters and inch threads on the same part, so an imperial machine is not forced into metric fits.
- Case depth is held to the smaller of the drawing requirement and the diameter rule, avoiding a through-hardened brittle shaft.
- Cut-to-length or fixed stock lengths, both deburred and checked for straightness.
- Optional hard chrome for wash-down and humid service.
- Bearing bore and shaft tolerance are quoted together when the customer sends the bearing part number.

## Applications

Replacing a worn inch shaft: send the drawing or the original part number, and the replacement is ground to the same tolerance band.

## About MS Linear

MS Linear is a Chinese manufacturer of precision motion components: profile guideways, ball screws, ball splines, linear shafts, cylindrical guides, linear bearings and single-axis modules. Parts are built to drawing, inspected before shipment, and shipped worldwide.
