---
title: "SC Series Cylindrical Guide: 8–50 mm Shaft, Aluminium Block"
date: 2026-11-18
description: "Product OverviewThe SC series is the light cylindrical guide: an aluminium carriage with a lined bore runs on a hardened shaft, and the carriage carries the loa..."
source: https://www.mslinear.com/cylindrical-guide/sc-series-cylindrical-linear-guide/
---

# SC Series Cylindrical Guide: 8–50 mm Shaft, Aluminium Block

## Product Overview

The SC series is the light cylindrical guide: an aluminium carriage with a lined bore runs on a hardened shaft, and the carriage carries the load through a plain or rolling interface depending on the model. It is the cheapest way to build a short-stroke linear axis with moderate accuracy.

Shaft diameters run from 8 mm to 50 mm, and each size is offered with a short, standard or long carriage. Long carriages spread the load over more shaft and take more moment, which is the usual fix when a short carriage rocks at the end of the stroke.

The carriage is aluminium with sealed ends, so chips and coolant stay out of the bore. Mounting bolts go through the carriage top or the side flange. For a shaft that is supported only at the ends, check the deflection: the [shaft guide](/linear-shaft-selection/) gives the support spacing calculation, and the [round-to-profile comparison](/cylindrical-guide-vs-square-guide/) explains where this family stops being the right answer.

<table class="ms-spec-table"><tr><th>Parameter</th><th>Specification</th></tr><tr><td>Series</td><td>SC cylindrical linear guide</td></tr><tr><td>Shaft diameter</td><td>8, 10, 12, 13, 16, 20, 25, 30, 35, 40, 50 mm</td></tr><tr><td>Carriage</td><td>Aluminium, short / standard / long</td></tr><tr><td>Seals</td><td>UU double seal standard</td></tr><tr><td>Dynamic load (reference)</td><td>From about 270 N at SC8 to about 1,570 N at SC30</td></tr><tr><td>Static load (reference)</td><td>From about 390 N at SC8 to about 1,570 N at SC30</td></tr><tr><td>Mounting bolts</td><td>M4 to M8, per size</td></tr><tr><td>Shaft tolerance</td><td>h6 or g6</td></tr><tr><td>Stroke</td><td>Set by shaft length and support spacing</td></tr><tr><td>Operating temperature</td><td>Confirmed at quotation for the selected seal compound</td></tr><tr><td>Minimum order</td><td>1 piece</td></tr><tr><td>Lead time</td><td>3–7 days for stock sizes; 10–15 days custom</td></tr></table>

## Product Features

- Aluminium carriage keeps moving mass low, which matters on a fast pick-and-place head.
- Three carriage lengths per size: the long body is the cheap fix for rocking at stroke ends.
- Sealed ends and a lined bore tolerate dust better than an open sleeve.
- Bolts come through the top or the side, so the carriage fits either a plate or a bracket.
- Load figures are quoted per size, not as a single headline number, because the range spans a factor of five.

## Applications

Short stroke, moderate load and a tight budget: this is the family to start from. Heavy side load or a long cantilever moves the choice to a profile rail.

## About MS Linear

MS Linear is a Chinese manufacturer of precision motion components: profile guideways, ball screws, ball splines, linear shafts, cylindrical guides, linear bearings and single-axis modules. Parts are built to drawing, inspected before shipment, and shipped worldwide.
