---
title: "SBR/TBR Twin-Rail Cylindrical Guide: 10–50 mm, Matched Set"
date: 2026-11-18
description: "Product OverviewThe SBR and TBR families are twin-rail cylindrical guides: two hardened shafts run parallel in one aluminium block, and the carriage bridges bot..."
source: https://www.mslinear.com/cylindrical-guide/sbr-tbr-twin-rail-cylindrical-guide/
---

# SBR/TBR Twin-Rail Cylindrical Guide: 10–50 mm, Matched Set

## Product Overview

The SBR and TBR families are twin-rail cylindrical guides: two hardened shafts run parallel in one aluminium block, and the carriage bridges both. The pair shares the load, so the carriage resists roll far better than a single shaft of the same diameter, and the block can be bolted straight to a plate without a second rail to align.

SBR covers the standard duty sizes from 10 mm to 50 mm shafts, with standard and long carriages and PP seals. TBR is the heavier build for gantry and transfer axes where the carriage also sees a moment. Both are supplied as a matched set: block, shafts and end supports, so the centre distance is fixed before the parts leave.

Because the two shafts are in one block, the assembly is self-aligning to the plate, and the mounting height is lower than two separate rails of the same size. For a cantilever, that lower height matters more than the load rating: the [moment guide](/linear-guideway-moment-load/) shows why.

<table class="ms-spec-table"><tr><th>Parameter</th><th>Specification</th></tr><tr><td>Series</td><td>SBR / TBR twin-rail cylindrical guide</td></tr><tr><td>Shaft diameter</td><td>10 to 50 mm</td></tr><tr><td>Carriage</td><td>Aluminium block, standard or long, PP seals</td></tr><tr><td>Configuration</td><td>Two shafts in one block, matched set with end supports</td></tr><tr><td>Dynamic load (reference)</td><td>About 1,020 N at SBR10L to about 2,360 N at SBR16L; TBR higher</td></tr><tr><td>Static load (reference)</td><td>Quoted per size in the datasheet</td></tr><tr><td>Mounting</td><td>Block bolted to plate; shafts fixed at both ends</td></tr><tr><td>Shaft tolerance</td><td>h6 or g6</td></tr><tr><td>Stroke</td><td>Set by shaft length and support spacing</td></tr><tr><td>Alignment</td><td>Fixed by the block, no second rail to align</td></tr><tr><td>Minimum order</td><td>1 set</td></tr><tr><td>Lead time</td><td>7–10 days; 10–15 days custom length</td></tr></table>

## Product Features

- Two shafts in one block resist roll without a second rail to align, which cuts assembly time on a gantry.
- Lower mounting height than two separate rails, so the centre of gravity stays down.
- Matched set supplied with shafts and end supports, keeping the centre distance fixed.
- Long carriages take the moment that a short block cannot.
- PP seals and a lined bore handle dust in transfer and packaging lines.

## Applications

Where the axis has to carry a moment and the budget rules out a profile rail, this is the compromise that keeps the frame simple.

## About MS Linear

MS Linear is a Chinese manufacturer of precision motion components: profile guideways, ball screws, ball splines, linear shafts, cylindrical guides, linear bearings and single-axis modules. Parts are built to drawing, inspected before shipment, and shipped worldwide.
