---
title: "KBE Open-Type Cylindrical Guide: 16–50 mm, Supported Shaft"
date: 2026-11-18
description: "Product OverviewThe KBE series is an open-type cylindrical guide: the carriage wraps a shaft that is supported along its length, with an opening on one side so ..."
source: https://www.mslinear.com/cylindrical-guide/kbe-open-type-cylindrical-guide/
---

# KBE Open-Type Cylindrical Guide: 16–50 mm, Supported Shaft

## Product Overview

The KBE series is an open-type cylindrical guide: the carriage wraps a shaft that is supported along its length, with an opening on one side so the shaft can pass a support rail or a bracket. It is used where the shaft cannot be free-standing, typically on a long axis with intermediate supports.

Sizes run from 16 mm to 50 mm shafts. The open mouth is set at an angle, and the block is built so the load still passes through the ball or plain contact rather than through the opening. Seals cover the open side as well as the ends.

The trade-off is stiffness: an open block carries less moment than a closed one of the same size, and the support spacing becomes the real limit on accuracy. The [round shaft comparison](/cylindrical-guide-vs-square-guide/) sets out when an open block is still worth it and when a profile rail wins.

<table class="ms-spec-table"><tr><th>Parameter</th><th>Specification</th></tr><tr><td>Series</td><td>KBE open-type cylindrical guide</td></tr><tr><td>Shaft diameter</td><td>16, 20, 25, 30, 40, 50 mm</td></tr><tr><td>Carriage</td><td>Aluminium, open mouth, sealed</td></tr><tr><td>Dynamic load (reference)</td><td>About 774 N at KBE16 to about 2,160 N at KBE40</td></tr><tr><td>Static load (reference)</td><td>About 1,180 N at KBE16 to about 4,020 N at KBE40</td></tr><tr><td>Contact angle</td><td>Set by the open geometry, quoted per size</td></tr><tr><td>Mounting bolts</td><td>M5 to M10, per size</td></tr><tr><td>Shaft tolerance</td><td>h6 or g6</td></tr><tr><td>Support</td><td>Shaft supported along its length; spacing from deflection</td></tr><tr><td>Stroke</td><td>Set by shaft and support layout</td></tr><tr><td>Minimum order</td><td>1 piece</td></tr><tr><td>Lead time</td><td>7–10 days; 10–15 days custom</td></tr></table>

## Product Features

- Open mouth lets the shaft pass a support rail, so a long axis can be built from supported sections.
- Seals cover the open side as well as the ends, which is where an open block usually leaks dust.
- Load path stays through the contact, not through the opening.
- Aluminium carriage keeps mass low on a long, fast axis.
- Supported shaft converts a deflection problem into a support-spacing decision.

## Applications

Long stroke on a modest budget: support the shaft at intervals and the open block tracks it without a profile rail.

## About MS Linear

MS Linear is a Chinese manufacturer of precision motion components: profile guideways, ball screws, ball splines, linear shafts, cylindrical guides, linear bearings and single-axis modules. Parts are built to drawing, inspected before shipment, and shipped worldwide.
