---
title: "SDM Linear Bearing: Closed, Adjustable and Open, 6 mm Up"
date: 2026-11-18
description: "Product OverviewThe SDM series is the Asian-standard linear bearing: a steel-caged ball sleeve that runs on a hardened shaft, with a nominal bore tolerance held..."
source: https://www.mslinear.com/linear-bearing/sdm-linear-bearing/
---

# SDM Linear Bearing: Closed, Adjustable and Open, 6 mm Up

## Product Overview

The SDM series is the Asian-standard linear bearing: a steel-caged ball sleeve that runs on a hardened shaft, with a nominal bore tolerance held to a few microns. Three versions sit in the same family: the standard closed type, the AJ adjustable type with a split housing, and the OP open type for a supported shaft.

Bores start at 6 mm and run through the common metric steps. The adjustable type lets a worn or slightly undersize shaft be brought back to zero clearance by tightening the housing, which is the practical fix on a machine that has run for years. The open type is for a shaft that has to pass a support rail.

Fit matters more than the catalogue number: the shaft is usually h6 or g6, the housing bore H7, and the clearance class decides whether the axis feels tight or loose. The [linear bearing guide](/linear-bearing-selection/) walks through the fits, and the [shaft guide](/linear-shaft-selection/) covers the matching shaft.

<table class="ms-spec-table"><tr><th>Parameter</th><th>Specification</th></tr><tr><td>Series</td><td>SDM linear bearing, Asian standard</td></tr><tr><td>Bore range</td><td>6 mm upward through the metric steps</td></tr><tr><td>Versions</td><td>SDM closed, SDM-AJ adjustable, SDM-OP open</td></tr><tr><td>Ball cage</td><td>Steel cage, four ball circuits</td></tr><tr><td>Shaft tolerance</td><td>h6 or g6</td></tr><tr><td>Housing bore</td><td>H7 for the closed type</td></tr><tr><td>Seals</td><td>UU double seal standard</td></tr><tr><td>Clearance</td><td>Adjustable on the AJ type; fixed class on the closed type</td></tr><tr><td>Operating temperature</td><td>Confirmed at quotation for the selected seal compound</td></tr><tr><td>Lubrication</td><td>Grease pre-filled; oil for high speed</td></tr><tr><td>Minimum order</td><td>1 piece</td></tr><tr><td>Lead time</td><td>3–7 days for stock bores</td></tr></table>

## Product Features

- Steel cage holds the ball circuits square, so the sleeve does not skew on a long stroke.
- AJ version can be tightened back to zero clearance instead of replaced.
- OP version passes a supported shaft without a second bearing.
- UU seals on both ends keep chips out of the race.
- Bore tolerance is quoted, not implied: the fit to the shaft is part of the order.

## Applications

Pair with an [SF shaft](/linear-shaft/sf-series-solid-linear-shaft/) for a plain, low-cost axis, or move to a [ball spline](/ball-spline/linear-ball-spline-rs-type/) when the same shaft has to carry torque.

## About MS Linear

MS Linear is a Chinese manufacturer of precision motion components: profile guideways, ball screws, ball splines, linear shafts, cylindrical guides, linear bearings and single-axis modules. Parts are built to drawing, inspected before shipment, and shipped worldwide.
