---
title: "LM and LME Linear Bearings: Metric and European Standard"
date: 2026-11-18
description: "Product OverviewThe LM and LME series are the metric and European-standard linear bearings. LM follows the Asian bore and length series, LME the European one; b..."
source: https://www.mslinear.com/linear-bearing/lm-lme-linear-bearing/
---

# LM and LME Linear Bearings: Metric and European Standard

## Product Overview

The LM and LME series are the metric and European-standard linear bearings. LM follows the Asian bore and length series, LME the European one; both are built with steel cages, sealed ends and the same three variants as the SDM family: closed, adjustable and open.

The difference that matters in practice is the length and the load: at the same bore, the European body is often longer, which spreads the load and lowers the contact pressure. A machine designed around a European bearing will not accept a short Asian body without losing stiffness, so the series is chosen from the drawing, not from the bore alone.

Bores run from 5 mm in the LME series upward, with LM covering the larger metric steps. Radial clearance, eccentricity and the housing fit are quoted per size; the [bearing guide](/linear-bearing-selection/) explains how to read them.

<table class="ms-spec-table"><tr><th>Parameter</th><th>Specification</th></tr><tr><td>Series</td><td>LM metric / LME European linear bearing</td></tr><tr><td>Bore range</td><td>LME from 5 mm; LM covering the larger metric steps</td></tr><tr><td>Versions</td><td>Closed, AJ adjustable, OP open</td></tr><tr><td>Ball cage</td><td>Steel cage, four circuits</td></tr><tr><td>Shaft tolerance</td><td>h6 or g6</td></tr><tr><td>Housing bore</td><td>H7 for the closed type</td></tr><tr><td>Seals</td><td>UU double seal standard</td></tr><tr><td>Radial clearance</td><td>Quoted per size, class on request</td></tr><tr><td>Eccentricity</td><td>Quoted per size in the datasheet</td></tr><tr><td>Lubrication</td><td>Grease pre-filled; oil for continuous duty</td></tr><tr><td>Minimum order</td><td>1 piece</td></tr><tr><td>Lead time</td><td>3–7 days for stock bores</td></tr></table>

## Product Features

- European body length available where the drawing calls for LME, without changing the shaft.
- Steel cage and four circuits keep the load centred on a long stroke.
- Adjustable version restores clearance on a worn shaft.
- Open version for supported shafts and pass-through rails.
- Sealed ends and a grease reservoir for maintenance intervals longer than a shift.

## Applications

When replacing a European bearing, send the original part number: the LME length and tolerance band are matched, so the housing does not have to be re-machined.

## About MS Linear

MS Linear is a Chinese manufacturer of precision motion components: profile guideways, ball screws, ball splines, linear shafts, cylindrical guides, linear bearings and single-axis modules. Parts are built to drawing, inspected before shipment, and shipped worldwide.
