---
title: "KH Miniature Linear Bearing: Short Body, 8 mm Bore Up"
date: 2026-11-18
description: "Product OverviewThe KH series is the short-body miniature linear bearing. At the same bore as a standard sleeve, the KH body is shorter, which lets a compact he..."
source: https://www.mslinear.com/linear-bearing/kh-miniature-linear-bearing/
---

# KH Miniature Linear Bearing: Short Body, 8 mm Bore Up

## Product Overview

The KH series is the short-body miniature linear bearing. At the same bore as a standard sleeve, the KH body is shorter, which lets a compact head sit closer to the work and keeps the moving mass down. It is the bearing for small gantries, dispenser heads and lab instruments where every millimetre of height counts.

The trade-off is moment capacity: a short body spreads the load over less shaft, so the axis has to be stiff and the load centred. Where the head sees an offset load, a standard body or a longer carriage is the safer choice.

Bores cover the small metric steps with sealed ends and a steel cage. Shaft tolerance stays h6 or g6, housing H7. The [bearing guide](/linear-bearing-selection/) covers the clearance classes, and the [miniature guideway guide](/miniature-linear-guideway-selection/) compares a shaft axis with a profile rail at the same scale.

<table class="ms-spec-table"><tr><th>Parameter</th><th>Specification</th></tr><tr><td>Series</td><td>KH miniature linear bearing, short body</td></tr><tr><td>Bore range</td><td>Small metric steps, 8 mm upward</td></tr><tr><td>Body</td><td>Short, sealed both ends</td></tr><tr><td>Ball cage</td><td>Steel cage</td></tr><tr><td>Shaft tolerance</td><td>h6 or g6</td></tr><tr><td>Housing bore</td><td>H7</td></tr><tr><td>Seals</td><td>UU</td></tr><tr><td>Load direction</td><td>Radial; moment limited by body length</td></tr><tr><td>Lubrication</td><td>Grease pre-filled</td></tr><tr><td>Operating temperature</td><td>Confirmed at quotation for the seal compound</td></tr><tr><td>Minimum order</td><td>1 piece</td></tr><tr><td>Lead time</td><td>3–7 days for stock bores</td></tr></table>

## Product Features

- Short body lowers the head and cuts moving mass on a small axis.
- Sealed ends keep fine dust out of a bearing that runs close to the work.
- Steel cage holds the circuits square at small bores.
- Fits the same h6/g6 shaft as a standard sleeve, so the shaft is not special.
- Clearance class quoted per size, so a tight or free feel is chosen, not guessed.

## Applications

Small stroke, light load, tight height: the KH body fits where a standard sleeve will not.

## About MS Linear

MS Linear is a Chinese manufacturer of precision motion components: profile guideways, ball screws, ball splines, linear shafts, cylindrical guides, linear bearings and single-axis modules. Parts are built to drawing, inspected before shipment, and shipped worldwide.
