---
title: "HM Integrated Motor Seat: Screw, Rail and Bearing in One Body"
date: 2026-11-18
description: "Product OverviewThe HM series is an integrated transmission block: motor seat, coupling housing, fixed-end bearing seat and nut block are machined into one body..."
source: https://www.mslinear.com/transmission-block/hm-integrated-motor-seat/
---

# HM Integrated Motor Seat: Screw, Rail and Bearing in One Body

## Product Overview

The HM series is an integrated transmission block: motor seat, coupling housing, fixed-end bearing seat and nut block are machined into one body, so the screw, the rail and the motor are aligned before anything is bolted to the machine frame. The usual assembly steps, and the usual source of misalignment, disappear.

Models are named by screw diameter and motor flange: HM12-57, HM15-80, HM20-130, HM35-180 and the sizes between. The number after the dash is the motor flange size, so a 130 mm flange motor and a 40 mm screw point to HM40-180 rather than to a stack of separate seats.

For a machine builder the gain is time: one part replaces four, and the axis accuracy comes from the block, not from the fitter. The [transmission block guide](/combined-transmission-block/) covers when the integrated block is worth the extra cost and when separate seats are still the better buy.

<table class="ms-spec-table"><tr><th>Parameter</th><th>Specification</th></tr><tr><td>Series</td><td>HM integrated transmission block</td></tr><tr><td>Model logic</td><td>HM + screw diameter + motor flange, e.g. HM20-130</td></tr><tr><td>Covered sizes</td><td>HM12-57, HM12-60, HM15-57, HM15-60, HM15-80, HM15-86, HM20-80, HM20-86, HM20-110, HM20-130, HM25-130, HM30-130, HM35-130, HM35-180, HM40-180</td></tr><tr><td>Included parts</td><td>Motor seat, coupling housing, fixed-end bearing seat, nut block</td></tr><tr><td>Bearing</td><td>Angular contact pair, preloaded</td></tr><tr><td>Screw fit</td><td>Matched to the screw diameter in the model code</td></tr><tr><td>Motor fit</td><td>Matched to the flange size in the model code</td></tr><tr><td>Alignment</td><td>Set by the block; no separate seat alignment</td></tr><tr><td>Mounting</td><td>Bolted to the machine plate; rail and screw fitted after</td></tr><tr><td>Lubrication</td><td>Bearing grease pre-filled</td></tr><tr><td>Minimum order</td><td>1 piece</td></tr><tr><td>Lead time</td><td>10–15 days, drawing and motor flange required</td></tr></table>

## Product Features

- One body replaces four seats, so the axis is aligned by the part rather than by the fitter.
- Preloaded bearing pair is fitted at the factory, removing the preload setting step.
- Motor flange is part of the model code, so a mismatched motor is caught at order time.
- Rigid body resists the bending that separate seats allow under fast reversal.
- Shorter assembly time on the machine frame, which is the real cost saving.

## Applications

Where the axis is built around one screw and one rail, the integrated block removes a whole assembly step. For separate seats, see the [MGD nut block](/transmission-block/mgd-fixed-nut-block/) and [MC nut block](/transmission-block/mc-adjustable-nut-block/).

## About MS Linear

MS Linear is a Chinese manufacturer of precision motion components: profile guideways, ball screws, ball splines, linear shafts, cylindrical guides, linear bearings and single-axis modules. Parts are built to drawing, inspected before shipment, and shipped worldwide.
