---
title: "MGD Fixed Nut Block: Square Housing for DSG Screw Nuts"
date: 2026-11-18
description: "Product OverviewThe MGD series is the fixed nut block: a square housing that holds the screw nut square to the rail and takes the axial load through the block i..."
source: https://www.mslinear.com/transmission-block/mgd-fixed-nut-block/
---

# MGD Fixed Nut Block: Square Housing for DSG Screw Nuts

## Product Overview

The MGD series is the fixed nut block: a square housing that holds the screw nut square to the rail and takes the axial load through the block instead of through the nut flange. It is the part that turns a screw and a rail into an axis without a custom bracket.

Sizes follow the screw nut: MGD16H for 16 mm screws with a DSG16 nut, MGD20H, MGD25H, MGD32H, MGD40H and MGD50H for the larger screws. The block is machined flat and square, with a mounting face that sits on the carriage plate and a bore that accepts the nut.

Fixed height means the block cannot be adjusted to trim the axis height; where that adjustment is needed, the [MC adjustable block](/transmission-block/mc-adjustable-nut-block/) does the same job with a height trim.

<table class="ms-spec-table"><tr><th>Parameter</th><th>Specification</th></tr><tr><td>Series</td><td>MGD fixed nut block</td></tr><tr><td>Sizes</td><td>MGD16H, MGD20H, MGD25H, MGD32H, MGD40H, MGD50H</td></tr><tr><td>Screw fit</td><td>16, 20, 25, 32, 40, 50 mm screws with matching DSG nut</td></tr><tr><td>Housing</td><td>Square, machined mounting face</td></tr><tr><td>Mounting bolts</td><td>M4 to M8, per size</td></tr><tr><td>Height</td><td>Fixed by the block</td></tr><tr><td>Material</td><td>Aluminium housing, steel fasteners</td></tr><tr><td>Alignment</td><td>Nut square to the rail through the block face</td></tr><tr><td>Lubrication</td><td>Nut lubrication per screw datasheet</td></tr><tr><td>Minimum order</td><td>1 piece</td></tr><tr><td>Lead time</td><td>7–10 days</td></tr></table>

## Product Features

- Square housing keeps the nut square to the rail without shimming.
- Axial load goes through the block face, not through the nut flange bolts.
- Sizes follow the DSG nut range, so the block and nut are ordered together.
- Flat mounting face sits on a machined carriage plate without a spacer.
- Fixed height keeps the stack predictable when the plate is already machined.

## Applications

Pair with a [ball screw](/ball-screw/internal-recirculation-ball-screw/) and the matching support seat; the [support seat guide](/screw-support-seat-selection/) gives the fixed and supported end pairing.

## About MS Linear

MS Linear is a Chinese manufacturer of precision motion components: profile guideways, ball screws, ball splines, linear shafts, cylindrical guides, linear bearings and single-axis modules. Parts are built to drawing, inspected before shipment, and shipped worldwide.
