Ball Screw vs Ball Spline: Functions, Differences and How to Choose

Category: News 2026-11-20

Ball screws and ball splines both use recirculating balls between a shaft and a nut, but they serve different jobs. Understanding the force each one carries avoids putting the wrong component in the axis.

What a ball screw does

  • Converts rotary motion into linear motion, or linear motion back into rotary, through the helix angle of the thread.
  • Carries axial load along the shaft axis; the nut moves linearly as the screw rotates.
  • Used for feed axes, positioning stages, presses and clamps where thrust and positioning are required.

What a ball spline does

  • Transmits torque while allowing the outer member to slide linearly along the spline shaft.
  • Carries radial load and torsional rotation load through the ground spline grooves and balls.
  • Used where a part must rotate and slide together, such as indexing, pick-and-place, feed spindles and clutch mechanisms.

Key differences at a glance

  • Motion: ball screw converts rotary to linear; ball spline transmits torque with free sliding.
  • Load: ball screw mainly carries axial thrust; ball spline carries radial load plus torque.
  • Lead and rotation: screw lead sets linear travel per turn; spline groove count and ball diameter set torque capacity.
  • Setup: screw pairs with a driven motor and support bearings; spline pairs with a rotating or sliding nut housing.

Which one to choose

  • Choose a ball screw when the axis needs controlled linear thrust and positioning over a stroke.
  • Choose a ball spline when the application must transmit rotation while sliding along the shaft.
  • Some machines combine both: a screw for feed, a spline for rotary sliding on the same spindle.

Sourced to your requirement

MS Linear supplies ball screws and ball splines cut to length, with end machining, matched nuts and coatings on request. Send the drawing or original part number; standard series dispatch in 3–10 days, custom versions run 15–20 days. Request a review of your axis.

China Factory Direct · Drop-in Compatible Dimensions

Buying Precision Motion Components from China
is Your Best Choice!

Factory-direct quality and worldwide shipping — standard parts leave the factory in 3–10 days, custom strokes and leads in 15–20 days (2–3 weeks). Send your drawing or the original part number and get a quotation within 24 hours.

Drop-in Replacement Factory-Direct Price Global Shipping OEM / Non-Standard Bulk Discounts