TGR-T Under-Locking Guideway: Rail Lock 15–55, M5–M14
Key Features
Locking element below the rail, so the top surface stays clear and the lock acts away from the ball races.
Applications
MS Linear Technical Support
Locking Guideways · TGR-T Under-Locking Guideway: Rail Lock 15–55, M5–M14
Technical Description and Selection ReferenceProduct Overview
The TGR-T series is an under-locking guideway: the rail carries a locking mechanism below the running surface, so the carriage can be held in position without an external brake. It is the rail for a vertical axis that must not drop when the drive is off, or for a head that has to stay put during a tool change.
Sizes run from 15 to 55, with rail weights from about 1.48 kg/m at TGR15T to 15.67 kg/m at TGR55T, and locking bolts from M5 to M14. The locking element sits under the rail, which keeps the top surface clear for the carriage and the mounting bolts.
Locking is a holding function, not a positioning one: it holds a static load, and the drive still does the moving. The locking guideway guide covers holding force, release sequence and the vertical-axis case.
| Parameter | Specification |
|---|---|
| Series | TGR-T under-locking guideway |
| Sizes | TGR15T, TGR20T, TGR25T, TGR30T, TGR35T, TGR45T, TGR55T |
| Rail width | 15 to 55 mm |
| Locking bolt | M5×0.8P to M14×2P, per size |
| Bolt pitch | 60 to 120 mm, per size |
| Rail weight | 1.48 kg/m at TGR15T to 15.67 kg/m at TGR55T |
| Locking location | Under the rail, top surface clear |
| Function | Holding, not positioning |
| Release | Manual or powered release, per configuration |
| Rail length | Built to your drawing |
| Minimum order | 1 piece |
| Lead time | 15–20 days, locking configuration confirmed at order |
Product Features
- Locking element below the rail keeps the top surface free for the carriage and bolts.
- Holds a vertical axis in place when the drive is off, without an external brake.
- Seven sizes from 15 to 55, with bolt and pitch matched to the rail.
- Locking is separate from the running surface, so it does not load the ball races.
- Rail lengths made to drawing, with the locking positions agreed at order.
Applications
Where a vertical carriage must hold position with the servo disabled, this rail replaces a brake on the motor and a clamp on the carriage.
About MS Linear
MS Linear is a Chinese manufacturer of precision motion components: profile guideways, ball screws, ball splines, linear shafts, cylindrical guides, linear bearings and single-axis modules. Parts are built to drawing, inspected before shipment, and shipped worldwide.
Read before you specify
Frequently Asked Questions
It holds a static load with the drive off, for example a vertical Z axis that must not drop during a tool change or a power loss. It is a holding function, not a positioning one: the drive still does the moving, and the lock is released before motion starts.
Putting it below the rail keeps the top surface clear for the carriage and the mounting bolts, so the block does not have to be modified and the rail height stays standard. The lock also acts away from the ball races, so it does not load the running surface.
Seven sizes from 15 to 55, with locking bolts from M5×0.8P to M14×2P and bolt pitch from 60 to 120 mm. Rail weight runs from about 1.48 kg/m at 15 to 15.67 kg/m at 55. Rail length is built to your drawing.
Release is manual on the basic build and powered on request. The release sequence is interlocked with the drive so the axis cannot command motion while the lock is engaged. The configuration is agreed at order because it changes the rail end machining.
The running surface is the same grade as the standard rail; the lock sits below it and does not touch the race. Accuracy and preload are selected as usual. Overall rail height differs because of the locking channel, so confirm it at quotation before the frame is machined.
Buying Locking Guideways from China
is Your Best Choice!
Factory-direct quality and worldwide shipping — standard parts leave the factory in 3–10 days, custom strokes and leads in 15–20 days (2–3 weeks). Send your drawing or the original part number and get a quotation within 24 hours.
Cookie preferences
Choose which categories this site may use. Necessary cookies cannot be switched off.
