MGD Fixed Nut Block: Square Housing for DSG Screw Nuts
Key Features
Square housing keeps the nut square to the rail without shims, with the load going through the block face.
Applications
MS Linear Technical Support
Transmission Blocks · MGD Fixed Nut Block: Square Housing for DSG Screw Nuts
Technical Description and Selection ReferenceProduct Overview
The MGD series is the fixed nut block: a square housing that holds the screw nut square to the rail and takes the axial load through the block instead of through the nut flange. It is the part that turns a screw and a rail into an axis without a custom bracket.
Sizes follow the screw nut: MGD16H for 16 mm screws with a DSG16 nut, MGD20H, MGD25H, MGD32H, MGD40H and MGD50H for the larger screws. The block is machined flat and square, with a mounting face that sits on the carriage plate and a bore that accepts the nut.
Fixed height means the block cannot be adjusted to trim the axis height; where that adjustment is needed, the MC adjustable block does the same job with a height trim.
| Parameter | Specification |
|---|---|
| Series | MGD fixed nut block |
| Sizes | MGD16H, MGD20H, MGD25H, MGD32H, MGD40H, MGD50H |
| Screw fit | 16, 20, 25, 32, 40, 50 mm screws with matching DSG nut |
| Housing | Square, machined mounting face |
| Mounting bolts | M4 to M8, per size |
| Height | Fixed by the block |
| Material | Aluminium housing, steel fasteners |
| Alignment | Nut square to the rail through the block face |
| Lubrication | Nut lubrication per screw datasheet |
| Minimum order | 1 piece |
| Lead time | 7–10 days |
Product Features
- Square housing keeps the nut square to the rail without shimming.
- Axial load goes through the block face, not through the nut flange bolts.
- Sizes follow the DSG nut range, so the block and nut are ordered together.
- Flat mounting face sits on a machined carriage plate without a spacer.
- Fixed height keeps the stack predictable when the plate is already machined.
Applications
Pair with a ball screw and the matching support seat; the support seat guide gives the fixed and supported end pairing.
About MS Linear
MS Linear is a Chinese manufacturer of precision motion components: profile guideways, ball screws, ball splines, linear shafts, cylindrical guides, linear bearings and single-axis modules. Parts are built to drawing, inspected before shipment, and shipped worldwide.
Read before you specify
Frequently Asked Questions
The HM body combines the motor seat, the coupling housing, the fixed-end bearing seat and the nut block in one part. The bearing pair is fitted and preloaded at the factory, so the screw, rail and motor are aligned by the block rather than by the fitter.
HM plus screw diameter plus motor flange: HM20-130 is a 20 mm screw with a 130 mm motor flange, HM40-180 a 40 mm screw with a 180 mm flange. Send the screw diameter and the motor drawing, and the code is confirmed before production.
The MGD fixed block is for a machined plate where the stack height is already set. The MC adjustable block adds a small height trim, which absorbs the difference between a machined plate and a real assembly. Use the fixed block when the plate is right, the adjustable one when the screw centre is fixed and the plate is not.
Yes. Transmission Blocks can be shipped as a set with the screw, the nut and the support seats, with the end journals machined to the block. That keeps the thread, the bearing seat and the nut concentric.
Standard codes dispatch in 3–10 days. A non-standard motor flange needs the motor drawing and adds machining time, typically 15–20 days (2–3 weeks); the date is confirmed in the quotation.
Buying Transmission Blocks from China
is Your Best Choice!
Factory-direct quality and worldwide shipping — standard parts leave the factory in 3–10 days, custom strokes and leads in 15–20 days (2–3 weeks). Send your drawing or the original part number and get a quotation within 24 hours.
Cookie preferences
Choose which categories this site may use. Necessary cookies cannot be switched off.


