Rigidity first, accuracy second

Screw drives, heavy guideways and rotary tables for milling, grinding and EDM. The axis has to hold position while the tool pushes back, and stay there after the spindle has warmed up.

High-load carriagesGround screwsThermal control

Where the axis sits

Six places this industry puts a linear axis. The list is short on purpose — if the machine is not here, the constraint section below still applies.

01

Vertical machining centres

X, Y and Z axes on box or linear ways, with preloaded screws driving each axis.

02

Surface and cylindrical grinders

Fine infeed on a short stroke; the screw and the way set the finish, not the control.

03

EDM and wire EDM

Submersible rotary tables and sealed ways for work that runs under dielectric.

04

Turn-mill and turret axes

Rotary indexing with a direct-drive table where the turret has to lock and unlock fast.

05

Laser and plasma gantries

Long travel with a light cutting head; acceleration and straightness trade off against each other.

What the axis has to survive

These three decide the build more often than the load rating does.

Load and vibration

Cutting force arrives as a shock, not a steady push. Carriage size and preload are set for that, not for the catalogue static rating.

Thermal growth

A screw grows with the spindle. Fixed-end and supported-end bearing arrangements decide where that growth goes.

Chips and coolant

Ways and screws need wipers, telescopic covers, or a sealed table when the work runs wet.

Selection notes

Three things worth settling before the drawing is frozen.

Preload decides the finish

Light preload for fast moves, medium for cutting. Over-preloading a small screw raises heat without improving the part.

Fix one end of the screw

A fixed-supported arrangement puts thermal growth at the free end. Both ends fixed needs a pre-stretch, and the drawing has to say so.

Wipers are not optional in cast iron

Graphite and chip dust get under a carriage faster than grease gets out. Specify wipers and a cover on anything cutting dry.

Questions that come up

Can you grind a screw to my stroke and end machining?

Yes. Send the drawing with journal diameters, thread length and keyway; screws are cut and end-machined to the drawing rather than trimmed from stock.

Which carriage size for a VMC Z-axis?

It depends on the overhang and the cutting force, not the table weight alone. Send the axis drawing and the machine class and we size the carriage from that.

Do you supply matched rail and carriage sets?

Rails and carriages are packed as matched pairs when ordered together, so preload and clearance are set at the factory.

Are the tables suitable for wet EDM?

The submersible range is built for dielectric immersion, with the seal and cable entry checked with the tank filled.

China Factory Direct · Drop-in Compatible Dimensions

Buying Machine Tools Motion Components from China
is Your Best Choice!

Factory-direct quality and worldwide shipping — standard parts leave the factory in 3–10 days, custom strokes and leads in 15–20 days (2–3 weeks). Send your drawing or the original part number and get a quotation within 24 hours.

Drop-in Replacement Factory-Direct Price Global Shipping OEM / Non-Standard Bulk Discounts