01Why one round is enough
Each missing field turns into a question, and each question costs a day. In practice a quote that takes three rounds is not three times the work; it is the same work done with the schedule reset twice.
The eight fields below are the ones that actually move the price. Everything else — bearing type, lubrication, packaging — follows from them or is confirmed on the quotation.
02The eight fields
| Field | What to write | What happens without it |
|---|---|---|
| Part number or drawing | The designation on the drawing, plus a PDF, DWG or STEP file if you have one. | The series and block type cannot be fixed, so the price is a range, not a number. |
| Rail width | Millimetres, measured across the rail body — not the block. | The size class is guessed. A block from the wrong width cannot seat on the raceway. |
| Rail length | End to end in millimetres, and say whether the end distance matters. | A rail cut to a nominal length can miss the last mounting hole. |
| Block count | Blocks per rail and total blocks, stated separately. | The quote mixes sets and single parts, and the totals do not compare. |
| Accuracy grade | The code stamped on the block. | A grade is assumed, and the assumption is often the cheapest one. |
| Preload code | The preload marking, usually next to the grade. | The pair is priced with the standard preload, which may not suit the axis. |
| Quantity | Per line item, and whether repeat orders are expected. | No price tier, and no view of whether it is a stock item or a production run. |
| Destination and term | Destination port or country, plus the term you work on. | Freight cannot be included, so two quotes are not comparable. |
03Where the markings are
Accuracy and preload are not printed on the invoice or the box; they are on the part. Look in three places, in this order:
The side of the block
Usually stamped or laser-marked. The grade letter and the preload code sit together, often with the size.
The rail end label
A label at the end of the rail repeats the size and, on many series, the grade. It survives longer than the block marking on worn machines.
The machine documentation
Assembly drawings and spare-parts lists carry the full designation. If the machine was bought used, this is often the only intact record.
If the marking is worn, send a sharp photo of both sides of the block in daylight. What the grade code means, and what each preload class does to stiffness and drag, is set out in accuracy and preload.
04Measuring the rail
Two numbers get confused more than any others: rail length and the last-hole distance.
| Measurement | How to take it |
|---|---|
| Overall length | End to end of the rail body, including the ends. This is what is ordered. |
| End distance | From the last mounting hole centre to the rail end. It changes with length and is the usual cause of a rail that will not bolt down. |
| Hole pitch | Centre to centre of two adjacent holes. On a long rail, check the pitch at both ends, not only in the middle. |
If the rail is being replaced rather than added, the checks that decide whether a new part fits at all are in the replacement cross-reference. The tolerance bands for each size are on the size chart.
05A copy-ready template
Paste this into an email, fill the brackets, attach the drawing and the block photo. It is short on purpose — the eight fields are all that is needed to price a standard or a custom part.
| Line | Text |
|---|---|
| Subject | RFQ – [part number] – [quantity] pcs |
| 1 | Part number or designation: [as printed on the drawing] |
| 2 | Rail width: [mm] · Rail length: [mm end to end] · End distance matters: [yes / no] |
| 3 | Blocks: [per rail] per rail · [total] total |
| 4 | Accuracy grade: [code on the block] · Preload: [code on the block] |
| 5 | Quantity: [pcs] · Repeat order expected: [yes / no] |
| 6 | Application and load: [machine, axis, approximate load] |
| 7 | Destination: [port / country] · Term: [as required] |
| 8 | Required date: [date] · Flexible: [yes / no] |
| Attach | Drawing (PDF / DWG / STEP), photo of the block marking, photo of the rail end label if present |
What happens after the enquiry is received, and what the quotation commits to, is on how an order runs.
06Questions we get
Can you quote from a part number without a drawing?
For a standard catalogue item, yes. For custom strokes, rail drilling or a non-standard mounting, the drawing is what gets quoted.
What if there is no drawing and no part number?
Send the rail width across the body, the block height, the hole pitch, the rail length, and a clear photo of the block marking. Those five identify the size class and the likely family.
Where are the accuracy and preload codes marked?
On the side of the block, repeated on the rail end label. On older parts the marking can be worn, so photograph both sides.
What happens if the accuracy or preload is left out?
An assumption is made, and it may not be the grade the machine needs. Stating it costs nothing.
Can one enquiry cover several part numbers?
Yes. List each line separately with its own quantity and date, so the quotation compares line by line.
Is the drawing kept confidential?
Drawings and customer information are used for quotation and production only, and are not passed to third parties.
07Where to go next
Before the enquiry, two things decide whether the size class is even right: the calculator for load and life, and series comparison for which family the axis belongs to. If the part is replacing something already installed, start from the cross-reference instead.
When the eight fields are ready, send them through the inquiry form and the quotation comes back with the dates and terms on it.
Part of the MS Linear product selection library — the engineering notes behind our linear guideways, ball screws, modules, shafts and bearings. For the full range, browse the MS Linear catalogue or the selection library index.
This page covers the essentials. For the complete selection PDF, full part-number tables and a matched recommendation, contact MS Linear or email [email protected] — we will send the relevant selection PDF for your load case.
Buying Precision Motion Components from China
is Your Best Choice!
Factory-direct quality and worldwide shipping — standard parts leave the factory in 3–10 days, custom strokes and leads in 15–20 days (2–3 weeks). Send your drawing or the original part number and get a quotation within 24 hours.
Cookie preferences
Choose which categories this site may use. Necessary cookies cannot be switched off.
