Reference data

Linear guideway size chart, size 15 to 65

One table, two contact types. Read the static rating first, divide by the safety factor, then check the moment before committing to a size. The numbers below are reference values for selection; the shipping inspection sheet governs.

8 sizes Ball and roller 4 min read

01Ratings by size

SizeBall C0, kNBall C, kNRoller C0, kNRoller C, kN
1511.816.42230
2017.824.43345
2524.834.95272
3038.752.278108
3549.570.5115160
4570100180250
55100141255350
65140190340470

C0 is the static rating and C the dynamic one; the life formula uses C, the stationary check uses C0. A single number quoted without saying which one is not a specification.

02From load to the smallest size

Take the working load, choose a static safety factor, and read the smallest size that satisfies C0 ≥ factor × P. The two tables below do that arithmetic for the ratings above.

Working load, kNSmallest ball size, fSL 1.5Smallest roller size, fSL 1.5
31515
51515
102015
152520
203020
253025
333525
454530
605535
806545
Working load, kNSmallest ball size, fSL 2.0Smallest roller size, fSL 2.0
51515
102515
153020
203525
254525
334530
455535
606545
8065 or larger45

Read the two tables together and the pattern is clear: at the same load a roller guideway is one or two sizes smaller, which is why heavy machine axes use rollers and light automation uses balls. The size step also changes the mounting height, so the smaller size is not automatically cheaper once the structure is counted.

03What the table does not answer

Load is one of three checks. The other two decide the size just as often:

  • Moment. A cantilevered head can exceed the permissible moment at size 25 while the vertical load is still trivial. See moment load.
  • Envelope. Mounting height and rail width set by the machine, not by the load; a wide-rail or low-profile family may force the size.
  • Life. A size chosen for static safety can still miss the life target at high speed or a heavy duty cycle; check with the life correction and the calculator.

04Questions we get

Is C0 the load the guideway can carry?

No. C0 is the static rating at a defined permanent deformation. The working load is C0 divided by a safety factor of 1.0–3.0, or 3.0–5.0 with shock.

Why is the roller rating higher at the same size?

Line contact instead of point contact: the load is shared over a longer patch. The trade is friction, weight and a slightly lower speed ceiling.

Can I choose the size from this table alone?

Use it to bracket the size, then check the moment, the mounting height and the rail length. Size is set by the worst of load, moment and envelope.

05Where to go next

All guides are listed on the knowledge index and grouped on the knowledge hub. The selection order is on sizing guide; the ball-versus-roller argument on ball against roller; the live arithmetic on the load and life calculator.

Products: linear guideways. Send the load case and the envelope, and we will confirm the size against the drawing rather than the table alone.

Part of the MS Linear product selection library — the engineering notes behind our linear guideways, ball screws, modules, shafts and bearings. For the full range, browse the MS Linear catalogue or the selection library index.

This page covers the essentials. For the complete selection PDF, full part-number tables and a matched recommendation, contact MS Linear or email [email protected] — we will send the relevant selection PDF for your load case.

China Factory Direct · Drop-in Compatible Dimensions

Buying Precision Motion Components from China
is Your Best Choice!

Factory-direct quality and worldwide shipping — standard parts leave the factory in 3–10 days, custom strokes and leads in 15–20 days (2–3 weeks). Send your drawing or the original part number and get a quotation within 24 hours.

Drop-in Replacement Factory-Direct Price Global Shipping OEM / Non-Standard Bulk Discounts